Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.9564672
![](http://i.b2b168.com/e/tag_pthy.gif)
- Product Categories
- Friendly Links
- home > Supply > 100 degrees to 100 degrees water temperature submersible pump deep well water pump 100
Information Name: | 100 degrees to 100 degrees water temperature submersible pump deep well water pump 100 |
Published: | 2013-12-12 |
Validity: | 3000 |
Specifications: | |
Quantity: | 999.00 |
Price Description: | |
Detailed Product Description: | I produced the submersible pump, the maximum temperature of 120 degrees. Tianjin-up Pump Friendly reminder!!! Submersible Pump Selection Guide submersible pump selection is very important, if improper selection, will result in a submersible pump life and reduce energy consumption, welcome new and old customers to inquire diving pump. So as not to affect your use. Users can wellbore diameter, temperature, PH value, water inflow, dynamic water level to choose the right model. If in doubt, please call us 022 -8372124824 hour service hotline: 18622670335 Website ①: http://www.tjcdpump.com Website ②: http://www.tjchengda.net Website ③: http://www. chengdasb.com Scope: Suitable for enterprises such as: bath, mining district heating companies using geothermal energy for power generation, extraction of underground hot water, depending on the hole diameter we have different specifications to choose from. The device is a low noise, high efficiency and save energy. If used in the pool, using the installation downdraft barrel. 1, increasing the water flow rate, better cooling of the motor and prolong life. 2, downdraft, you can lower the water pumping. Technical parameters: 1: allowable working temperature range: +5 to +120 ℃ 2: solids content (mass ratio) of not more than 0.01% 3: PH value (pH) 6.5-8.5 4: hydrogen sulfide content of not more than 1.5mg / L 5: The chloride ion content of not more than 400mg / L 6: the unit must be completely submerged work invasion. Vertical use when selecting the pump model caliper models to match, avoid large-diameter diameter hole with a small diameter pump, this is not conducive to heat the motor. Motor parameters: submersible motor lead cable length: 3m. If you need longer lead cable can call us in advance, submersible motor is lubricated with water, must give the motor cavity filled with clean water before use, (Note: Be sure to fill otherwise it will reduce the life of the motor) If you forget to add hydroelectric machine quickly burned out. Motor protection class: 1PX8 wire with high temperature water line. Power supply: 380V, deviation does not exceed ± 5%, frequency 50HZ, deviation does not exceed ± 1%, if the customer needs a special frequency voltage or special needs to tell us in advance. Material: Impeller: cast iron HT200 or tin bronze (various brands) such as: ZcuSn3Zn8Pb6Nil pump casing: cast iron HT200, or stainless steel such as: 2Grl3.034 shaft: cold drawn steel chrome-plated or stainless steel 2Grl3 (1050 ℃ quenching, strengthen torque ) Motor Seal: O-ring rubber seal broken; mechanical seals. Motor adjustment sac plastic material expansion. |
Admin>>>
You are the 17846 visitor
Copyright © GuangDong ICP No. 10089450, Pump Co., Ltd. Tianjin Cheng All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 17846 visitor
Copyright © GuangDong ICP No. 10089450, Pump Co., Ltd. Tianjin Cheng All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility